SPECS

Dual Mounting System: Top Mount/Silicone Gasket
Case material: Aluminum (anodized/e-coating)
Layout: WKL/WK
Weight bar: Stainless Steel/Copper/Brass
PCB: 1.2 mm hot-swap, ANSI layout, Non-flex cut, NKRO, USB-C interface, QMK/VIAL supported, includes Caps Lock key/Scroll Lock key RGB LED indicator
Plate: Polycarbonate (non-flex cut)/FR4/Aluminum/Carbon fiber
Typing angle: 7 degree
Dimension: 358 x 139 x 32.5 x 17.5 mm (rubber feet height around 1.9 mm)
Weight: Around 2.7Kg (built with keycaps, stainless steelweight bar)
Keycaps: PBTfans Touching Grass- Base (SKU:PTD10-31)

Flash Manual

Flash Manual: Link
VIA firmware: Download latest VIA firmware from https://ydkb.io/help/?www#/other-firmware/vial (select KBD8x Mk3)

Include

Price $148 of the kit only includes the items below:

Case x1
Carrying case x1
Silicone socks x1 set
Cherry screw-in stabilizers 104 kit x1
Screwdriver(T6+T8 bit) x1
Screws x1 set
Rubber feet x1 set
Acrylic ambient light module (already installed) x1
Keycaps base kit x1

The following accessories should be purchased separately and added to the cart with the kit together:

Plate x1
PCB x1
Foam kit x1 (PCB foam x1, Switch Pad x1, Bottom foam x2, Force break tape x1)
Stainless steel weight bar x1

Disclaimer

Disclaimer: Check more details from the link

#Weight bar#

The surface of the brass and copper weight bar has been treated with nano-coating, which will temporarily prevent oxidation, but natural oxidation will still occur over time, which is normal, you are not eligible for a Return and refund.
- Please pay attention to the installation method. If the weight bar scratches the case during installation, it will easily cause the nano-coating to fall off, you are not eligible for a Return or refund.
- Due to the soft nature of brass/copper, some weight bars will be slightly distorted or uneven, but it will not affect use after being fixed with screws on the case, you are not eligible for Return & Refund.
- The stainless steel weight bar contains unique crescent machine marks which are not eligible for Return or refund.
- The internal scratches, machine marks or oxidation of the weight bar are not covered by the warranty.

# Case#

Keyboard case - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund.
- Case interior - Based on the production method of anodizing and spraying, the product can lead to some smearing at the surface level, and you'll see some hook marks within the case. Also, the spraying process can not guarantee that the color will look 100% the same on the internal case corners. The color off on the interior case and the interior corners are not eligible for Return and refund.
- About the potential coating defects: Because the Faraday cage exists for this type of production method, it will be hard to coat the Interior corners perfectly. Instead of killing all the smoothness on the case coating, the interior painting job won't be as perfect as the exterior's.

#Daughter board#

Take care not to damage the JST cable and PCB components during assembly or when taking the board apart. Otherwise, there is a possibility that components may be damaged or fall off.
- All the daughter boards from KBDfans are pre-assembled with JST cable, please check carefully how they connect together, if you insert the other end in the wrong direction, there is a chance of damaging the pin inside the connector.
Those two situations above are not eligible for refund and replacement.

#Attention#

- Make sure to QC your keyboard case and weight before building it. For any issues besides the above, please get in touch with our customer support agents to get help.
- Anything built is not eligible for Return and refund.

Click here for more KBD8X MKIII details

2025 Summer Sale Keyboard

Ready to Use KBD8X MKIII Keyboard With PBTfans Touching Grass